/****************************************************************************

**

** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).

** All rights reserved.

** Contact: Nokia Corporation (qt-info@nokia.com)

**

** This file is part of the documentation of the Qt Toolkit.

**

** $QT_BEGIN_LICENSE:LGPL$

** No Commercial Usage

** This file contains pre-release code and may not be distributed.

** You may use this file in accordance with the terms and conditions

** contained in the Technology Preview License Agreement accompanying

** this package.

**

** GNU Lesser General Public License Usage

** Alternatively, this file may be used under the terms of the GNU Lesser

** General Public License version 2.1 as published by the Free Software

** Foundation and appearing in the file LICENSE.LGPL included in the

** packaging of this file.  Please review the following information to

** ensure the GNU Lesser General Public License version 2.1 requirements

** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.

**

** In addition, as a special exception, Nokia gives you certain additional

** rights.  These rights are described in the Nokia Qt LGPL Exception

** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.

**

** If you have questions regarding the use of this file, please contact

** Nokia at qt-info@nokia.com.

**

**

**

**

**

**

**

**

** $QT_END_LICENSE$

**

****************************************************************************/

/*!

    \page qtscriptdebugger-manual.html

    \title Qt Script Debugger Manual

    \brief A manual describing how to use the Qt Script debugger.

  The Qt Script debugger is a tool for debugging script execution in

  Qt applications that use Qt Script. Application developers can embed

  the debugger into their application through the

  QScriptEngineDebugger class. This manual describes how to use the

  debugger. We assume that the reader is somewhat familiar with

  general debugging concepts and existing debugging tools.

  We assume that the debugger has been integrated into the application

  through the QScriptEngineDebugger::standardWindow()

  function, which provides the standard debugger configuration.

  \tableofcontents

  \section1 Getting Started

  The following image shows the debugger as created with

  \l{QScriptEngineDebugger::}{standardWindow()}:

  \image qtscript-debugger.png Running a script under the Qt Script debugger.

  The debugger will start, i.e., take control over the script's

  execution when any of these conditions are met:

  \list

    \o The \c{debugger} statement is encountered in the script.

    \o Clicking the \gui Interrupt menu item from the \gui Debug

        menu in the main window.

    \o A breakpoint is reached.

    \o An uncaught script exception is thrown.

  \endlist

  Once the debugger is started, the execution state can be inspected,

  e.g., the value of variables can be queried and the current program

  stack shown. New breakpoints can be set.

  The debugger will resume, i.e., give the control back to the script

  engine, when the user clicks \gui Continue menu item from the \gui

  Debug menu. It will be invoked again if one of the conditions

  described in the list above is met.

  \section1 Overview of Debugger Components

  The debugger's functionality is divided into a series of components,

  each being a widget that can be shown in the main window of the

  debugger. The following table describes each component and how they

  relate to each other.

  \table

    \header

      \o Component

      \o Description

  \row

  \o Console Widget 

  \o The console widget provides a command-line interface to the

  debugger's functionality, and also serves as an interactive script

  interpreter. The set of commands and their syntax is inspired by

  GDB, the GNU Debugger. Commands and script variables are

  auto-completed through the TAB key.

  Any console command that causes a change in the debugger or debugger

  target's state will immediately be reflected in the other debugger

  components (e.g. breakpoints or local variables changed).

  The console provides a simple and powerful way of manipulating the

  script environment. For example, typing "x" and hitting enter will

  evaluate "x" in the current stack frame and display the result.

  Typing "x = 123" will assign the value 123 to the variable \c{x} in

  the current scope (or create a global variable \c{x} if there isn't

  one -- scripts evaluated through the console can have arbitrary side

  effects, so be careful).

  \row

  \o Stack Widget

  \o The stack widget shows a backtrace of the script execution state.

  Each row represents one frame in the stack. A row contains the

  frame index (0 being the inner-most frame), the name of the script function,

  and the location (file name and line number). To select a particular

  stack frame to inspect, click on its row.

  \row

  \o Locals Widget

  \o The locals widget shows the variables that are local to the

  currently selected stack frame; that is, the properties of the

  objects in the scope chain and the \c{this}-object. Objects can be

  expanded, so that their properties can be examined, recursively.

  Properties whose value has changed are shown in bold font.

  Properties that are not read-only can be edited. Double-click on the

  value and type in the new value; the value can be an arbitrary

  expression. The expression will be evaluated in the associated stack

  frame. While typing, you can press the TAB key to get possible

  completions for the expression.

  \row

  \o Code Widget

  \o The code widget shows the code of the currently selected script.

    The widget displays an arrow in the left margin, marking the

    code line that is being executed.

    Clicking in the margin of a line will cause a breakpoint to be

    toggled at that line. A breakpoint has to be set on a line that

    contains an actual statement in order to be useful.When an uncaught script exception occurs, the

    offending line will be shown with a red background.

    The code widget is read-only; it cannot currently be used to edit

    and (re)evaluate scripts. This is however possible from the

    command-line interface, see \l{Console Command Reference}.

  \row

  \o Scripts Widget

  \o The scripts widget shows the scripts that are currently loaded in

  the script engine. Clicking on a script will cause its code to be

  shown in the code widget. When a script is no longer referenced by

  the debugger target it is removed from the scripts widget. Code

  evaluated through QScriptEngine::evaluate() without a name specified, will be

  displayed in the widget as Anonymous.

  \row

    \o Breakpoints Widget

  \o The breakpoints widget shows all the breakpoints that are set.  A

  breakpoint can be disabled or enabled by clicking the checkbox next

  to the breakpoint's ID (the ID is provided so that the breakpoint

  can be manipulated through the console widget as well).

  A condition can be associated with the breakpoint; the condition can

  be an arbitrary expression that should evaluate to true or

  false. The breakpoint will only be triggered when its location is

  reached \bold{and} the condition evaluates to true.

  Similarly, if the breakpoint's ignore-count is set to N, the

  breakpoint will be ignored the next N times it is hit.

  A new breakpoint can be set by clicking the New Breakpoint button

  and typing in a location of the form <filename>\bold{:}<linenumber>.

  The breakpoint location can refer to an already loaded script, or

  one that has not been loaded yet.

  \row

  \o Debug Output Widget

  \o The debug output widget shows messages generated by the print()

  script function. Scripts can use the special variables \c{__FILE__}

  and \c{__LINE__} to include the current location information in the

  messages.

  \row

  \o Error Log Widget

  \o The error log widget shows error messages that have been generated.

     All uncaught exceptions that occur in the engine will appear here.

  \endtable

  \section2 Resuming Script Evaluation

  Script evaluation can be resumed in one of the following ways:

  \list

  \o \bold{Continue}: Evaluation will resume normally.

  \o \bold{Step Into}: Evaluation will resume until the next statement is reached.

  \o \bold{Step Over}: Evaluation will resume until the next statement is reached;

                but if the current statement is a function call, the debugger

                will treat it as a single statement.

  \o \bold{Step Out}: Evaluation will resume until the current function exits and

               the next statement is reached.

  \o \bold{Run to Cursor}: Run until the statement at the cursor is reached.

  \o \bold{Run to New Script}: Run until the first statement of a new script is reached.

  \endlist

  In any case, script evaluation can also be stopped due to either of the

  following reasons:

  \list

  \o A \c{debugger} statement is encountered.

  \o A breakpoint is hit.

  \o An uncaught script exception occurs.

  \endlist

  \section2 Resuming After an Uncaught Exception

  When an uncaught script exception occurs, it is not possible to

  continue evaluating the current function normally. However, you can

  use the console command \bold{return} to catch the exception and

  return a value to the calling function.

  \section1 Console Command Reference

  Note that you can also get help on the available commands by typing

  ".help" in the console.

  \section2 Breakpoint-related Commands

  Break points is set

  \section3 break <location>

  Sets a breakpoint at a given code line.

  \code

  .break foo.qs:123

  \endcode

  This command sets a breakpoint at \c{foo.qs}, line 123.

  \code

  .break 123

  \endcode

  This command sets a breakpoint at line 123 in the current script; the current script

  is the script associated with the current stack frame.

  Each breakpoint has a unique identifier (an integer) associated with it.

  This identifier is needed by other breakpoint-related commands.

  \section3 clear <location>

  \code

  .clear foo.qs:123

  \endcode

  clears (deletes) the breakpoint at \c{foo.qs}, line 123.

  \code

  clear 123

  \endcode

  clears (deletes) the breakpoint at line 123 in the current script;

  the current script is the script associated with the current stack

  frame.

  \section3 condition <breakpoint-id> <expression>

  Sets a condition for a breakpoint.

  \code

  .condition 1 i > 42

  \endcode

  specifies that breakpoint 1 should only be triggered if the variable \c{i}

  is greater than 42.

  The expression can be an arbitrary one, i.e. it can have

  side-effects. It can be any valid QScript conditional

  expression.

  \section3 delete <breakpoint-id>

  Deletes a breakpoint, i.e., removes it from the current debugging

  session.

  \section3 disable <breakpoint-id>

  Disables a breakpoint. The breakpoint will continue to exist, but

  will not stop program execution.

  \section3 enable <breakpoint-id>

  Enables a breakpoint. Breakpoints are enabled by default, so you

  only need to use this command if you have disabled to breakpoint

  previously.

  \section3 ignore <breakpoint-id> <count>

  Sets the ignore-count of a breakpoint, i.e., the breakpoint will not

  stop the program execution unless it have been reached \c count

  times. This can, for instance, be useful in loops to stop at a

  specific iteration.

  \code

  .ignore 1 5

  \endcode

  Specifies that breakpoint 1 should be ignored the next 5 times it is

  hit.

  \section3 info breakpoints

  Lists the breakpoints that are set.

  \code

    .info breakpoints

  \endcode

  \section3 tbreak <location>

  Sets a temporary breakpoint. This command is identical to the

  \c{break} command, only the breakpoint will be automatically deleted

  the first time it is hit.

  \section2 File-related Commands

  \section3 list <location>

  Lists the contents of a script around a given location, where the

  location is given as a line number and, optionally, the name of the

  file from which you will print. If only a line number is given, \c

  {.list} will use the file of the current stack frame.

  \code

    .list foo.qs:125

  \endcode

  When no arguments are given, \c{list} will incrementally list

  sections of the current script.

  \section3 info scripts

  Lists the scripts that are currently loaded.

  \section2 Execution-related Commands

  \section3 advance <location>

  Advances execution to a given location. The syntax of the location

  is the same as for setting breakpoints. For example:

  \code

    .advance foo.qs:125

  \endcode

  \section3 continue

  Continues execution normally, i.e, gives the execution control over

  the script back to the QScriptEngine.

  \section3 eval <program>

  Evaluates a program. 

  \section3 finish

  Continues execution until the current function exits and the next

  statement is reached (i.e., the statement after the call to the

  function).

  \section3 interrupt

  Requests that execution should be interrupted. Interruption will

  occur as soon as a new script statement is reached.

  \section3 next <count = 1>

  Continues execution until a new statement is reached; but if the

  current statement is a function call, the function call will be

  treated as a single statement. This will be done \c count times

  before execution is stopped; the default is one.

  \section3 return <expression>

  Makes the current frame return to its caller. If \c expression is

  given, it will sent as the result of the function (i.e., replacing

  the functions return value). \c expression can be any valid QScript

  expression.

  \section3 step <count = 1>

  Continues execution until a new statement is reached. If the number

  \c count is given as argument, this will be done \c count times

  before execution is stopped. As opposed to \l{next <count = 1>},  \c

  step will enter functions when encountering a function call

  statement.

  \section2 Stack-related Commands

  \section3 backtrace

  Shows a backtrace of the current execution. The trace will list the

  function name and its position in the script for each stack frame.

  \section3 down

  Selects the previous (inner) stack frame. The execution will not

  return to this frame, but you will get access to its local

  variables. 

  \section3 frame <index>

  This command moves to the stack frame with the given \c index. The

  index of the frame on the top of the stack is 0. Previous frames are

  numbered from 1 and upwards (the bottom frame in the stack has the

  largest index).

  \section3 info locals

  Lists the variables that are in the scope of the current frame.

  \section3 up

  Selects the next (outer) stack frame.

*/