diff -r 1af5c1be89f8 -r 92d87f2e53c2 tools/elf4rom/libs/dwarf-20071209/dwarfdump/dwarfdump.conf
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/tools/elf4rom/libs/dwarf-20071209/dwarfdump/dwarfdump.conf	Fri Jan 15 09:07:44 2010 +0000
@@ -0,0 +1,415 @@
+# MIPS/IRIX  ISA/ABI
+# Used to configure dwarfdump printing of .debug_frame and
+# .eh_frame.
+
+# Any number of abi's can be described. Only one can be selected
+# in a given darfdump run (see dwarfdump options)
+#  Available commands are
+# beginabi:  <abiname>
+# reg: <regname> <dwarf regnumber>
+# frame_interface: <integer value 2 or 3>
+# cfa_reg:  <number>
+# initial_reg_value:  <number: normally 1034 or 1035 >
+# reg_table_size: <size of table>
+# endabi:  <abiname>
+#
+# Symbolic names do not work here, use literal numbers
+# where applicable (in C standard decimal, octal (leading 0) or
+# hexadecimal <leading 0x>).
+#
+# Whitespace is required to separate command: from operands and
+# operands from each other on a line.
+#
+# There is no ordering required within a beginabi/endabi pair.
+# As many ABIs as required may be listed.
+# dwarfdump will choose exactly one abi to dump frame information.
+#
+
+
+# Here using MIPS abi as an example to describe
+# the format. The MIPS/IRIX ABI is built-in to dwarfdump, so this one
+# is not really required.
+# Begin with abi name (use here and on dwarfdump command line).
+beginabi: mips
+
+# Instructs dwarfdump to default to the older frame interface.
+# Use value 3 to use the newer interface.
+# The '2' interface is supported but deprecated (deprecated
+# because it cannot work with all popular ABIs: mixing
+# the cfa-rule into the table column set was not a good idea
+# but it is part of the MIPS/IRIX standard usage).
+frame_interface: 2
+
+# If (and only if) using  frame_interface: 2 tell dwarfdump
+# what table colum that DW_FRAME_CFA_COL is.
+# If using frame_interface: 3 cfa_reg: should be 
+#  DW_FRAME_CFA_COL3 (1036)
+cfa_reg: 0
+
+# For MIPS, the same as DW_FRAME_SAME_VAL (1035).
+# For other ISA/ABIs 1034 (DW_FRAME_UNDEFINED_VAL) might be better.
+# Depends on the ABI convention, if set wrong way too many
+# regs will be listed in the frame output.
+# This instructs  dwarfdump  to set libdwarf to this value,
+# overriding the libdwarf default.
+# If initial_reg_value not set the libdwarf default is used
+# (see libdwarf.h DW_FRAME_REG_INITIAL_VALUE).
+initial_reg_value:  1035  # DW_FRAME_SAME_VAL
+
+# Built in to frame_interface: 2 as 66.
+reg_table_size: 66
+
+
+# Only name registers for wich a r4 (for example) is not what you
+# want to  see
+# No particular order  of the reg: lines required.
+reg: cfa 0   # Used with MIPS/IRIX original DWARF2 interface
+reg: r1/at 1
+reg: r2/v0 2 
+reg: r3/v1 3
+reg: r4/a0  4
+reg: r5/a1  5
+reg: r6/a2  6
+reg: r7/a3  7
+reg: r8/t0  8
+reg: r9/t1  9
+reg: r10/t2 10
+reg: r11/t3 11
+reg: r12/t4 12
+reg: r13/t5 13
+reg: r14/t6 14
+reg: r15/t7 15
+reg: r16/s0 16
+reg: r17/s1 17
+reg: r18/s2 18
+reg: r19/s3 19
+reg: r20/s4 20
+reg: r21/s5 21
+reg: r22/s6 22
+reg: r23/s7 23
+reg: r24/t8 24
+reg: r25/t9 25
+reg: r26/k0 26
+reg: r27/k1 27
+reg: r28/gp 28
+reg: r29/sp 29
+reg: r30/s8 30
+reg: r31  31
+
+reg: $f0 32
+reg: $f1 33
+reg: $f2  34
+reg: $f3 35
+reg: $f4 36
+reg: $f5 37
+reg: $f6 38
+reg: $f7 39
+reg: $f8 40
+reg: $f9 41
+reg: $f10 42
+reg: $f11 43
+reg: $f12 44
+reg: $f13 45
+reg: $f14  46
+reg: $f15 47
+reg: $f16 48
+reg: $f17 49
+reg: $f18 50
+reg: $f19 51
+reg: $f20 52
+reg: $f21 53
+reg: $f22 54
+reg: $f23 55
+reg: $f24 56
+reg: $f25 57
+reg: $f26 58
+reg: $f27 59
+reg: $f28 60
+reg: $f29 61
+reg: $f30 62
+reg: $f31 63
+reg: ra  64
+reg: slk 65
+
+
+# End of abi definition.
+endabi: mips
+
+
+
+
+
+
+# MIPS/IRIX  ISA/ABI for testing libdwarf.
+beginabi: mips-simple
+frame_interface: 2
+reg_table_size: 66
+cfa_reg: 0
+initial_reg_value:  1035
+
+reg: cfa 0   # Used with MIPS/IRIX original DWARF2 interface
+reg: ra  64
+reg: slk 65
+
+# End of abi definition.
+endabi: mips-simple
+
+# MIPS/IRIX  ISA/ABI for testing  the new frame interface
+# with libdwarf.
+beginabi: mips-simple3
+frame_interface: 3
+
+# When using frame_interface: 3 the size of the register table
+# is not fixed. It can be as large as needed. 
+reg_table_size: 66
+cfa_reg: 1036  # DW_FRAME_CFA_COL3
+initial_reg_value:  1035
+
+# No cfa as a 'normal' register. 
+# Rule 0 is just register 0, which is not used
+# in frame descriptions.
+# (so cfa does not have a number here, and dwarfdump gives
+# it the name 'cfa' automatically).
+reg: ra  64
+reg: slk 65
+# End of abi definition.
+endabi: mips-simple3
+
+
+beginabi: ia64
+frame_interface: 3
+initial_reg_value: 1034  # DW_FRAME_UNDEFINED_VAL
+cfa_reg: 1036  # DW_FRAME_CFA_COL3
+reg_table_size: 695
+
+# The following register names are not necessarily correct...
+# Register indexes r32-r127 not used.
+reg: f0 128
+# ...
+reg: f127 255
+reg: b0 321
+reg: b1 322
+reg: b2 323
+reg: b3 324
+reg: b4 325
+reg: b5 326
+reg: b6 327
+reg: b7 328
+reg: vfp 329
+reg: vrap 330
+reg: pr 331
+reg: ip 332
+reg: psr 333
+reg: cfm 334
+reg: k0 335
+reg: k1 336
+reg: k2 337
+reg: k3 338
+reg: k4 339
+reg: k5 340
+reg: k6 341
+reg: k7 342
+reg: rsc  350 
+reg: bsp 351 
+reg: bspstore 352 
+reg: rnat 353
+reg: fcr 355
+reg: eflag 358
+reg: csd 359
+reg: ssd 360 
+reg: cflg 361
+reg:  fsr 362
+reg: fir 363
+reg:  fdr 364
+reg: pfs 398 
+reg: lc 399
+reg: ec 400
+
+endabi: ia64
+
+
+beginabi: x86
+frame_interface: 3
+initial_reg_value: 1035  # DW_FRAME_SAME_VAL
+reg_table_size: 66  # more than large enough, hopefully.
+cfa_reg: 1036  # DW_FRAME_CFA_COL3
+
+# The following register names are not necessarily correct...
+reg: eax 0
+reg: ecx 1    
+reg: edx 2
+reg: ebx 3
+reg: esp 4
+reg: ebp 5
+reg: esi 6
+reg: edi 7
+reg: eip 8
+reg: eflags 9
+
+reg: trapno 10
+reg: st0 11
+reg: st1 12
+reg: st2 13
+reg: st3 14
+reg: st4 15
+reg: st5 16
+reg: st6 17
+reg: st7 18
+# 19 is ? 20 is ?
+reg: xmm0  21
+reg: xmm1  22 
+reg: xmm2  23
+reg: xmm3  24
+reg: xmm4  25
+reg: xmm5  26
+reg: xmm6  27
+reg: xmm7  28
+
+reg: mm0  29
+reg: mm1  30
+reg: mm2  31
+reg: mm3  32
+reg: mm4  33
+reg: mm5  34
+reg: mm6  35
+reg: mm7  36
+
+reg: fcw  37
+reg: fsw  38
+reg: mxcsr 39
+
+reg: es 40
+reg: cs 41
+reg: ss 42
+reg: ds 43
+reg: fs 44
+reg: gs 45
+# 46 47 are ?
+reg: tr 48
+reg: ldtr 49
+
+
+endabi: x86
+
+
+beginabi: x86_64
+frame_interface: 3
+initial_reg_value: 1035  # DW_FRAME_SAME_VAL
+reg_table_size: 66  # more than large enough, hopefully.
+cfa_reg: 1036  # DW_FRAME_CFA_COL3
+
+# The following register names are not necessarily correct...
+reg: rax 0
+reg: rdx 1    
+reg: rcx 2
+reg: rbx 3
+reg: rsi 4
+reg: rdi 5
+reg: rbp 6
+reg: rsp 7
+reg: r8 8
+reg: r9 9
+reg: r10 10
+reg: r11 11
+reg: r12 12
+reg: r13 13
+reg: r14 14
+reg: r15 15
+reg: rip 16
+reg: xmm0 17
+reg: xmm1 18
+reg: xmm2 19
+reg: xmm3 20
+reg: xmm4 21
+reg: xmm5 22
+reg: xmm6 23
+reg: xmm7 24
+reg: xmm8 25
+reg: xmm9 26
+reg: xmm10 27
+reg: xmm11 28
+reg: xmm12 29
+reg: xmm13 30
+reg: xmm14 31
+reg: xmm15 32
+
+reg: st0 33
+reg: st1 34
+reg: st2 35
+reg: st3 36
+reg: st4 37
+reg: st5 38
+reg: st6 39
+reg: st7 40
+
+reg: mm0 41
+reg: mm1 42
+reg: mm2 43
+reg: mm3 44
+reg: mm4 45
+reg: mm5 46
+reg: mm6 47
+reg: mm7 48
+
+reg: rflags 49
+reg: es 50
+reg: cs 51
+reg: ss 52
+reg: ds 53
+reg: fs 54
+reg: gs 55
+# 56, 57 are ?
+reg: fs.base 58
+reg: gs.base 59
+# 60 61 are ?
+reg: tr 62
+reg: ldtr 63
+
+endabi: x86_64
+
+beginabi: m68k
+frame_interface: 3
+initial_reg_value: 1035  # DW_FRAME_SAME_VAL
+reg_table_size: 66  # more than large enough, hopefully.
+cfa_reg: 1036  # DW_FRAME_CFA_COL3
+
+reg: d0 0
+reg: d1 1
+reg: d2 2
+reg: d3 3
+reg: d4 4
+reg: d5 5
+reg: d6 6
+reg: d7 7
+
+reg: a0 8
+reg: a1 9
+reg: a2 10
+reg: a3 11
+reg: a4 12
+reg: a5 13
+reg: a6 14
+reg: sp 15
+
+reg: fp0 16
+reg: fp1 17
+reg: fp2 18
+reg: fp3 19
+reg: fp4 20
+reg: fp5 21
+reg: fp6 22
+reg: pc 23
+
+endabi: m68k
+
+# 'Generic 1000 register abi'.
+# This is useful as a 'general' ABI settings for
+# cpus using up to 1000 registers. The register names
+# show as a number, like  'r991'.
+beginabi: generic
+frame_interface: 3
+initial_reg_value: 1035  # DW_FRAME_SAME_VAL
+cfa_reg: 1036  # DW_FRAME_CFA_COL3
+reg_table_size: 1000
+reg: r0 0
+endabi: generic