diff -r 000000000000 -r ba25891c3a9e appinstall_plat/appmngr2runtimeapi/inc/appmngr2debugconfig.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/appinstall_plat/appmngr2runtimeapi/inc/appmngr2debugconfig.h	Thu Dec 17 08:51:10 2009 +0200
@@ -0,0 +1,147 @@
+/*
+* Copyright (c) 2008-2009 Nokia Corporation and/or its subsidiary(-ies).
+* All rights reserved.
+* This component and the accompanying materials are made available
+* under the terms of "Eclipse Public License v1.0"
+* which accompanies this distribution, and is available
+* at the URL "http://www.eclipse.org/legal/epl-v10.html".
+*
+* Initial Contributors:
+* Nokia Corporation - initial contribution.
+*
+* Contributors:
+*
+* Description:   Defines trace macros
+*
+*/
+
+
+#ifndef APPMNGR2DEBUGCONFIG_H
+#define APPMNGR2DEBUGCONFIG_H
+
+#ifdef _DEBUG
+
+
+/* ---------------------------------------------------------------------------
+ * Enable/disable traces
+ * ---------------------------------------------------------------------------
+ * Uncomment one of the following macros to enable tracing:
+ */
+//#define PRINT_FLOG_TO_RDEBUG
+//#define PRINT_FLOG_TO_UTRACE
+//#define PRINT_FLOG_TO_FLOGGER
+/*
+ * Select the trace type by uncommenting FLOG_DEBUG_TRACES or
+ * FLOG_PERFORMANCE_TRACES (or both) below.
+ * 
+ * Note that also SYMBIAN_TRACE_ENABLE must be defined in order
+ * to use PRINT_FLOG_TO_UTRACE.  
+ */ 
+
+
+/* ---------------------------------------------------------------------------
+ * Debug traces
+ * ---------------------------------------------------------------------------
+ * Uncomment the following line to enable debug traces:
+ */
+//#define FLOG_DEBUG_TRACES
+/*
+ * Debug traces are generated using FLOG macro. FLOG takes a format
+ * string and variable number of arguments, like TDes::Format(). Except
+ * that format string "x" is replaced with string literal _L("x"), so
+ * string literal _L() should not be used when calling FLOG. 
+ * 
+ * Examples:
+ *    FLOG( "CAppMngr2AppUi::ConstructL" );
+ *    FLOG( "CAppMngr2AppUi::HandleCommandL( %d )", aCommand );
+ *    FLOG( "Scanning %d: %S", iIndex, &iDirName ) );
+ */
+
+
+/* ---------------------------------------------------------------------------
+ * Performance traces
+ * ---------------------------------------------------------------------------
+ * Uncomment the following line to enable performance traces:
+ */
+//#define FLOG_PERFORMANCE_TRACES
+/*
+ * Performance traces measure and print times that different
+ * code fragments take (in milliseconds). Please note that
+ * printing traces is usually slow and this may affect to the 
+ * results if debug or other performance traces are printed
+ * out from the timed functions.
+ * 
+ * There are two sets of performance tracing macros: static and
+ * dynamic. Parameter is used to match corresponding macros and
+ * it is also printed in trace output. Macros use temporary TTime
+ * variables, hence macros (using the same parameter label) must
+ * be in the same scope.
+ * 
+ * The macros are:
+ * FLOG_PERF_STATIC_BEGIN - records start time
+ * FLOG_PERF_STATIC_END - records end time and prints results
+ * FLOG_PERF_DEFINE - defines temporary variables
+ * FLOG_PERF_START - records start time (fast)
+ * FLOG_PERF_STOP - records end time (fast)
+ * FLOG_PERF_PRINT - prints out the results (slow)
+ * 
+ * Examples:
+ *    FLOG_PERF_STATIC_BEGIN( LoadPluginsL )
+ *    LoadPluginsL();
+ *    FLOG_PERF_STATIC_END( LoadPluginsL )
+ *    FLOG_PERF_STATIC_BEGIN( CreateScannerL )
+ *    CreateScannerL();
+ *    FLOG_PERF_STATIC_END( CreateScannerL )
+ *    FLOG_PERF_STATIC_BEGIN( FetchDataTypesL )
+ *    FetchDataTypesL();
+ *    FLOG_PERF_STATIC_END( FetchDataTypesL )
+ * 
+ * This generates traces like:
+ *    AppMngr2: PERF LoadPluginsL: 157 ms
+ *    AppMngr2: PERF CreateScannerL: 8 ms
+ *    AppMngr2: PERF FetchDataTypesL: 2 ms
+ * 
+ * Dynamic macros do the same thing as static macros, but possibly
+ * slow parts (that may affect to results) are put into separate 
+ * FLOG_PERF_DEFINE and FLOG_PERF_PRINT macros. Printing the trace
+ * is usually slow, which may affect to results (e.g. if static
+ * macros are nested). Dynamic macros can be used to measure run
+ * times of active objects too.
+ * 
+ * Semicolons are not needed after FLOG macros. Semicolons can be
+ * used, but they may issue "illegal empty declaration" warning
+ * after FLOG_PERF_DEFINE() macros when traces are disabled.  
+ */
+
+
+// Sanity check: each FLOG macro produces compilation error if
+// PRINT_FLOG_TO_UTRACE is defined but SYMBIAN_TRACE_ENABLE is not.
+#if( defined( PRINT_FLOG_TO_UTRACE ) && !defined( SYMBIAN_TRACE_ENABLE ) )
+#error "SYMBIAN_TRACE_ENABLE not defined, PRINT_FLOG_TO_UTRACE needs it." 
+#endif
+
+// Sanity check: traces can be printed to only one target (RDebug, UTrace, or FLogger)
+#if( defined( PRINT_FLOG_TO_RDEBUG ) && defined( PRINT_FLOG_TO_UTRACE ) )
+#error "Cannot define both PRINT_FLOG_TO_RDEBUG and PRINT_FLOG_TO_UTRACE macros."
+#endif
+#if( defined( PRINT_FLOG_TO_RDEBUG ) && defined( PRINT_FLOG_TO_FLOGGER ) )
+#error "Cannot define both PRINT_FLOG_TO_RDEBUG and PRINT_FLOG_TO_FLOGGER macros."
+#endif
+#if( defined( PRINT_FLOG_TO_UTRACE ) && defined( PRINT_FLOG_TO_FLOGGER ) )
+#error "Cannot define both PRINT_FLOG_TO_UTRACE and PRINT_FLOG_TO_FLOGGER macros."
+#endif
+
+// Sanity check: when traces are enabled, also trace type must be selected.
+#if( defined( PRINT_FLOG_TO_RDEBUG ) || defined( PRINT_FLOG_TO_UTRACE ) || defined( PRINT_FLOG_TO_FLOGGER ) )
+#define FLOG_TRACES_ENABLED
+#endif
+#if( defined( FLOG_TRACES_ENABLED ) )
+#if( !defined( FLOG_DEBUG_TRACES ) && !defined( FLOG_PERFORMANCE_TRACES ) )
+#error "Traces enabled but FLOG_DEBUG_TRACES or FLOG_PERFORMANCE_TRACES is not defined."
+#endif
+#endif
+
+#endif  // _DEBUG
+
+#endif  // APPMNGR2DEBUGCONFIG_H
+