diff -r 29b14275133a -r e5fd00cbb70a omap3530/omap3530_drivers/spi/omap3530_spi.inl
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/omap3530/omap3530_drivers/spi/omap3530_spi.inl	Tue Sep 21 02:30:11 2010 +0100
@@ -0,0 +1,118 @@
+// This component and the accompanying materials are made available
+// under the terms of the License "Eclipse Public License v1.0"
+// which accompanies this distribution, and is available
+// at the URL "http://www.eclipse.org/legal/epl-v10.html".
+//
+// Initial Contributors:
+// lukasz.forynski@gmail.com
+//
+// Contributors:
+//
+// Description:
+// omap3530/omap3530_drivers/spi/omap3530_spi.inl
+//
+// This file contains definitions to internal SPI implementation.
+// It is not intended to be exported - SPI registers must not be modified from outside of
+// the driver!
+//
+
+
+// This sets the CS line to inactive mode (Specify aActiveMode as appropriate for configuration)
+// The CS pin will be put back to the opposite mode - using GPIO..
+inline void SetCsInactive(TInt aModule, TInt aChannel, TSpiSsPinMode aActiveMode)
+	{
+	//__ASSERT_DEBUG(aModule < KMaxSpiChannelsPerModule, Kern::Fault("omap3530_spi.inl, line: ", __LINE__)); // aChannel > module channels
+	// set the pin to the opposite to the currently active CS mode..
+	TUint16 csPinOptions = aActiveMode == ESpiCSPinActiveLow ? KCsPinModeUp : KCsPinModeDown;
+	const TPinConfig& csConf = ModulePinConfig[aModule].iCs[aChannel];
+	__ASSERT_DEBUG(csConf.iAddress, Kern::Fault("omap3530_spi.inl, line: ", __LINE__)); // aChannel > module channels
+
+	// now switch the pin mode..
+	SCM::SetPadConfig(csConf.iAddress, csConf.iMswLsw, SCM::EMode4 | csPinOptions); // always go to mode 4 (gpio)
+	}
+
+void SetCsActive(TInt aModule, TInt aChannel, TSpiSsPinMode aActiveMode)
+	{
+	//__ASSERT_DEBUG(aModule < KMaxSpiChannelsPerModule, Kern::Fault("omap3530_spi.inl, line: ", __LINE__)); // aChannel > module channels
+	TUint16 csPinOptions = aActiveMode == ESpiCSPinActiveLow ? KCsPinModeUp : KCsPinModeDown;
+	const TPinConfig &csConf = ModulePinConfig[aModule].iCs[aChannel];
+	__ASSERT_DEBUG(csConf.iAddress, Kern::Fault("omap3530_spi.inl, line: ", __LINE__)); // aChannel > module channels
+
+	// now switch the pin mode back to the SPI
+	SCM::SetPadConfig(csConf.iAddress, csConf.iMswLsw, csConf.iFlags | csPinOptions); // revert to intended mode
+	}
+
+
+// Setup pad function for SPI pins..
+void SetupSpiPins(TUint aSpiModule)
+	{
+	//__ASSERT_DEBUG(aModule < KMaxSpiChannelsPerModule, Kern::Fault("omap3530_spi.inl, line: ", __LINE__)); // aChannel > module channels
+	const TSpiPinConfig& pinCnf = ModulePinConfig[aSpiModule];
+	SCM::SetPadConfig(pinCnf.iClk.iAddress, pinCnf.iClk.iMswLsw, pinCnf.iClk.iFlags);
+	SCM::SetPadConfig(pinCnf.iSimo.iAddress, pinCnf.iSimo.iMswLsw, pinCnf.iSimo.iFlags);
+	SCM::SetPadConfig(pinCnf.iSomi.iAddress, pinCnf.iSomi.iMswLsw, pinCnf.iSomi.iFlags);
+	// Cs pins are set dynamically during operations.
+	}
+
+// helper function - returns appropriate value for the register for a given mode
+inline TUint32 SpiClkMode(TSpiClkMode aClkMode)
+	{
+	// (POL) (PHA)
+	//	0     0     Mode 0: spim_clk is active high and sampling occurs on the rising edge.
+	//	0     1     Mode 1: spim_clk is active high and sampling occurs on the falling edge.
+	//	1     0     Mode 2: spim_clk is active low and sampling occurs on the falling edge.
+	//	1     1     Mode 3: spim_clk is active low and sampling occurs on the rising edge.
+
+	TUint val = 0;
+	switch(aClkMode)
+		{
+		//case ESpiPolarityLowRisingEdge:	// Active high, odd edges
+			/*val |= MCSPI_CHxCONF_POL;*/ // 0 (not set)
+			/*val |= MCSPI_CHxCONF_PHA;*/ // 0 (not set)
+			//break; // commented out - it's only for  reference - there's nothing to change
+
+		case ESpiPolarityLowFallingEdge: // Active high, even edges
+			/*val |= MCSPI_CHxCONF_POL;*/ // 0 (not set)
+			val |= MCSPI_CHxCONF_PHA;     // 1
+			break;
+
+		case ESpiPolarityHighFallingEdge: // Active low,  odd edges
+			val |= MCSPI_CHxCONF_POL;     // 1
+			/*val |= MCSPI_CHxCONF_PHA;*/ // 0 (not set)
+			break;
+
+		case ESpiPolarityHighRisingEdge: // Active low,  even edges
+			val |= MCSPI_CHxCONF_POL; // 1
+			val |= MCSPI_CHxCONF_PHA; // 1
+			break;
+		}
+	return val;
+	}
+
+// helper function - returns appropriate value for the register for a given frequency (or error->if not found)
+inline TInt SpiClkValue(TInt aClkSpeedHz)
+	{
+	for (TInt val = 0; val < 0xD; val++) // only loop through all possible values..
+		{
+		if(MCSPI_K48MHz >> val == aClkSpeedHz)
+			{
+			return (val << 2); // return value ready for the register
+			}
+		}
+	return KErrNotFound;
+	}
+
+inline TInt SpiWordWidth(TSpiWordWidth aWidth)
+	{
+	TInt val = 0;
+	switch(aWidth)
+		{
+		case ESpiWordWidth_8:  val |= MCSPI_CHxCONF_WL(8); break;
+		case ESpiWordWidth_10: val |= MCSPI_CHxCONF_WL(10); break;
+		case ESpiWordWidth_12: val |= MCSPI_CHxCONF_WL(12); break;
+		case ESpiWordWidth_16: val |= MCSPI_CHxCONF_WL(16); break;
+//		case ESpiWordWidth_32: val |= MCSPI_CHxCONF_WL(32); break; // TODO uncomment when fix for Bug 3665 is released
+		}
+	return val;
+	}
+